Powder coating

Brief technical description:

• During this coating process, the powder is electrostatically loaded and sprayed onto the component to be coated. The powder is then fired at approximately 200°C. This provides the coating with permanent anchorage on the component and subsequently gives it a very decorative appearance. The type of powder used determines the properties of the coating.

• The coatings applied are relatively thick, i.e. between 60 and 120 µm, and very corrosion-resistant. The process is environmentally compatible and almost waste-free, as the powder can be recycled.

Advantages:

• Decorative surface
• In all RAL colours
• UV resistant
• High degree of corrosion protection

Please note:

• This method can also be used as a duplex method, using a base coat made from zinc, zinc alloy or KTL, to achieve particularly high levels of protection >1000 h against base metal corrosion, using a salt spray test according to DIN 50021 SS.

Area of utilisation:

• Automotive and supplier industry (as a stone chip coating for components in the chassis area, interior and exterior)
• Building machinery industry
• Electrical industry
• Mechanical engineering industry
• Packaging industry