Powder coating
Brief technical description:
- During this coating process, the powder is electrostatically loaded and sprayed onto the component to be coated. The powder is then fired at approximately 200°C. This provides the coating with permanent anchorage on the component and subsequently gives it a very decorative appearance. The type of powder used determines the properties of the coating.
- The coatings applied are relatively thick, i.e. between 60 and 120 µm, and very corrosion-resistant. The process is environmentally compatible and almost waste-free, as the powder can be recycled.
Advantages:
- Decorative surface
- In all RAL colours
- UV resistant
- High degree of corrosion protection
Please note:
- This method can also be used as a duplex method, using a base coat made from zinc, zinc alloy or KTL, to achieve particularly high levels of protection >1000 h against base metal corrosion, using a salt spray test according to DIN 50021 SS.
Area of utilisation:
- Automotive and supplier industry (as a stone chip coating for components in the chassis area, interior and exterior)
- Building machinery industry
- Electrical industry
- Mechanical engineering industry
- Packaging industry